Help! No bolts in starter Motor?

[stormforce]

If i remember rightly then i just moved the fuel filter housing to be able to get to the top bolt.Theres not a great deal of room but it can be done from above
scrap that i just remembered i used long extension bars and got them both from underneath fiddly but easier then the top

[The Lovely Boyo]

Don't know if you've got there already but - copy this

http://toyotasurf.asn.au/techsite/starter.htm

I did and its a good write up.

Make up the long wrench exactly as he says and it'll work - you have to thread it up from under the car and through the frame.

Take the NS wheel off - much easier.

Coz of my body lift, I was able to wriggle the motor out and down past the frame. If you are coming up past the fuel lines, try and attach a length of rope to help pull the motor up - its very difficult otherwise.

Oh, and quite the stinkingest job ever!

[Diezel Weazel]

Somethink like I said in me first post, No 2 forgot they nut n bolt tho ....Cos
it's at least 2 years since I done mine n no Body lift !!!!

note to self: 2" body lift !! for next time ..... aahhh

There's always a Payback ..... Ya just never see it Comin !!!!