yobit eobot.com

Announcement

Collapse
No announcement yet.

oooops! what if...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by fatfires
    I have bought 2 axle sets (4 bearing sets )from roughtrax and none of them had the o ring, I reused the old utilising a bit of silicone as insurance, it aint leaked yet. I do happen to think that they should be included in the bearing kit, but once you got it stripped it's a bit late if you rely on your truck!!
    well i did it all earlier leaving the brakes intact and it seems to seal so far. what sort of oil should I use for the diff (not LSD)
    Tim
    Break It,Fix It,Repeat,Break It,Fix It,Repeat

    Comment


    • #17
      Originally posted by dirtydog
      well i did it all earlier leaving the brakes intact and it seems to seal so far. what sort of oil should I use for the diff (not LSD)
      not LSD oil ??

      i guess the same stuff as an open front diff which is GL5 75W-90
      Last edited by nero279; 7 November 2007, 00:41.
      =========
      =SOLD UP!=
      =========

      Comment


      • #18
        Originally posted by dirtydog
        well i did it all earlier leaving the brakes intact and it seems to seal so far. what sort of oil should I use for the diff (not LSD)
        SAE 80/90
        Did I mention I have a BLUE one
        Tony

        Comment


        • #19
          better go check what I put in then - sounds about right though
          Tim
          Break It,Fix It,Repeat,Break It,Fix It,Repeat

          Comment

          Working...
          X