4WD problems

[scotty]

how can i tell without taking it to the muddy stuff

cheers scotty

[NiftyNev]

just want to check everything else first. With the wires bridged first make sure the light goes out when the button is out and the transfer lever is in high range..This will determine if the light is working correctly. Next, put transfer lever into 4 Low.The light should come on. You may have to move the vehicle a little. If that works move the transfer to 2 High press the button for 4 High and see if the front tailshaft turns as you drive forward a little. If it does the you should be in 4WD as long as the ADD is engaging. The front sensor on the diff is the one which senses when the ADD is engaged so if it's not the light will not come on.

Nev

[jeff.fn02jwa]

good to hear that

good to hear that your surf is up and running again and thanks for the beer the other night