Can Anyone Advise Me On how......

[hellmett]

.....to tighten up these?

(see attached photo!)

Have just rplaced upper and lower ball joints on both sides which I found easier if I undid the shock and the drop link.

Trouble is, the damn things are loose now and I cannot seem to tighten them anymore as there seems to be no thread left on the bolt.

Thanks,

Gary

[stormforce]

.....to tighten up these?

(see attached photo!)

Have just rplaced upper and lower ball joints on both sides which I found easier if I undid the shock and the drop link.

Trouble is, the damn things are loose now and I cannot seem to tighten them anymore as there seems to be no thread left on the bolt.

Thanks,

Gary

Get a set of mole grips on them or a clamp as thats what i had to do to a track rod end last week

or if its the bottom then you may want to put new bushes in there