Tweet
I'm having trouble getting a pin out to replace the pads.
I've tried hitting with a hammer and punch. And pulling it with pliers.
Any Ideas
I've tried hitting with a hammer and punch. And pulling it with pliers.
Any Ideas
-
There are 10 kind of people in the world, those that understand binary and those that don't.
'There's no place like 127.0.0.1' -
Originally posted by onlynik
WD40, a bigger hammer and a flat nose roll pin punch.
http://www.fultoncorp.com/images/609rlpnp.jpeg -
Soaked the bugger in WD40 and went and bought a bigger hammer. The b@starding pins still doesn't want to move.
Been trying to move in back and forth.There are 10 kind of people in the world, those that understand binary and those that don't.
'There's no place like 127.0.0.1'Comment
-
Hope you removed the wire clip.
NevComment
-
Yep clip is removed, as is the lower pin, but the top one aint budging.
I'm considering cutting it and knocking it out from the other side.There are 10 kind of people in the world, those that understand binary and those that don't.
'There's no place like 127.0.0.1'Comment
-
Done, thanks for teh help. Let the pins saok in wd40 and hit it several time, it then came out.Originally posted by BUSHWHACKER
Now I can brake. oh and I can stop too.There are 10 kind of people in the world, those that understand binary and those that don't.
'There's no place like 127.0.0.1'Comment
Comment