F.A.O. Bushwacker (I think), re:rear springs

[BUSHWHACKER]

- I found that even though the drop bracket lines the panhard up with the axle I also needed an adjustable panhard rod to get the axle square.

Not so with mine, without the drop bracket the rear wheel stuck out about 1.5 inches on the drivers side, With the drop bracket everything is correct, panhard rod horizontal and wheel in line with the body.

Mickey, how soon do you need a drop bracket?

[mickeyboy]

I'd like to get this done as soon as I can, but it's not as if it's not drivable without doing it, so I can hold on for a little bit.

[BUSHWHACKER]

O.k. I'll fabricate a few this week. I can't start them until Wednesday tho, as I've just painted the workshop floor!

[mickeyboy]

Great. Got to let me know how much though?

[Gamedawn]

Not so with mine, without the drop bracket the rear wheel stuck out about 1.5 inches on the drivers side, With the drop bracket everything is correct, panhard rod horizontal and wheel in line with the body.

Mickey, how soon do you need a drop bracket?

1.5 inches I was only talking about 10mm

[BUSHWHACKER]

Pic 3:Mmmm I like it!!

Oh and are they surf rails on top or d'ya salvage 'em off something else??

Wound the torsion bars up a bit today!

[mickeyboy]

R they standards? How much did you wind 'em up?

It looks a LOT higher at the front.

[BUSHWHACKER]

Yep, they're standard torsion bars, the rear is still pert (higher than the front)

It probably looks high 'cos I've removed my wheel arch extensions.

[dirtydog]

Yep, they're standard torsion bars, the rear is still pert (higher than the front)

It probably looks high 'cos I've removed my wheel arch extensions.

why so?

[BUSHWHACKER]

why so?

Short sleeves in summer!

[mickeyboy]

Cheque will be in the mornings post mate. Sorry about the delay, but I don't have a cheque book, had to ask my mum what it was!!!!!!!??????????!!??

[BUSHWHACKER]

Cheque will be in the mornings post mate. Sorry about the delay, but I don't have a cheque book, had to ask my mum what it was!!!!!!!??????????!!??

No worries mate, I'm behind schedule too!
Yours parcel went in the post today.

[mickeyboy]

Thank you Mr Bushwhacker, it's got here. Now all I gotta do is get someone to fit it and the springs in the right place!!

[andrewlee31]

dont suppose u want to share a back of fag packet drawing do u? or you going into business ??

[mickeyboy]

dont suppose u want to share a back of fag packet drawing do u? or you going into business ??

Have you got one? Cos I wish I had!! Got my fitter mate busting my b*lls over "are these definitely gonna fit?" and "how do all these bits go together?"