yobit eobot.com

Announcement

Collapse
No announcement yet.

rear shockers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rear shockers

    Model KZN185
    hi guys, took your advise and got new shocks, fitted front last week, what a difference. went to fit rears today but does not look so easy. usually Toyota design is straightforward but i can not see top of shock mounting and after scraffling around with my fingers i thought there has to be an easier way. any advise would be helpfull, thanks in advance.
    Last edited by retnublue; 19 March 2006, 16:01. Reason: Model Type

  • #2
    There is a plastic cap on top of the rear shocks like the front ones, I think its a 10mm ring spanner to remove 2 bolts in each then you can access the nut on top of the shock. The drivers side is the worst one to do.
    I also removed the underslung spare to give better access.
    GOOD LUCK!
    (\__/)
    (='.'=) SQUIRREL MUNCHER GRRRRRRR
    (")_(")

    Comment


    • #3
      Originally posted by retnublue
      ...there has to be an easier way. any advise would be helpfull, thanks in advance.
      Get a body lift! You'll be able to work on them easily then!

      Comment

      Working...
      X