If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Lost all my belts this morning after the power steering went due aircon belt pulling the rest off. STEVO is popping round to the house to replace them for me this morning because he's good like that. STEVO YOUR DA MAN
Jobs done im a happy chappy once again! Just got to get a Mortgage sorted for our new house as too many outgoings effect borrowing even though all debts will be paid off with the equity.
ac belt gone, acquired new one from milner.
but how the hell do you get it one without removing the rad???
If you have the aircon rad under the engine, its tricky, look down the left hand side of the rad, right at the bottem is the tensioner pully, its locked by the nut through the middle, undo this, then with the steering on full left lock, lift the front rubber flap, right behind the steering box you can see the adjusting nut. A 14mm socket and long extension will let you loosen the tensioner pulley. Fit the belt and tighten everythnig up.
An alternative, is to unbolt the bash plate, unbolt the aircon rad and pull it down as far as you can at the front, you may be able to get you hands in this way and reach the tensiner pully.
If you don't have the aircon rad underneath, its easy from below.
4x4toys.co.uk - Keeping you on and off the road...
hi all '' first crisis ever '' love reading all the messages '' the cracks good ... anyway can anyone help me sort my aircon out , i originally thought my system might need re-gassing .. but when the switch is applied the compressor doesnt engage ???? any ideas .... pleeeese .. its getting hotter
Comment