yobit eobot.com

Announcement

Collapse
No announcement yet.

Transmission Cooling

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Transmission Cooling

    I need suggestions for better transmission cooling.
    96 1KZ-TE with A343F AT.
    B&M 13,000 BTU trans cooler connected after the rad (i.e. trans outlet - rad - cooler - trans inlet). It's installed in front of the rad. 7" fan on the trans cooler blowing air at it
    Synthetic ATF
    I find that I am

  • #2
    It could be that the oil in your viscous fan has degraded . It seems to be the most common reason for overheating. If it has never been done it definitely needs doing . Refill with new oil at replace fan. Cheers

    Comment


    • #3
      I meant replace the oil or get a new viscous coupling for the fan

      Comment


      • #4
        Install trans cooler before the radiator.

        Nev.

        Comment


        • #5
          Are your hoses in/out of the BM cooler on top? No chance its somehow got an airlock?
          Сви можемо

          Comment


          • #6
            My thinking here is that as your ATF goes through the heat exchanger at the bottom of the rad, it is not cooled as you are already running hot. When crawling uphill

            Comment


            • #7
              I think you are right, and I also so a lot of differing opinions on where to place the cooler.

              My temp sensor is in the flex hose coming off the trans outlet pipe.

              Comment

              Working...
              X