nipples......

[mikey]

hmmmmm...
the top & bottom front suspension swivel joints have an blanking plug instead of a grease nipple on my truck. It's a very short standard m6 bolt (10mm spanner size). I tried using one of the u/j ones but the thread's too fine.
Anybody know where I can get one from? Not Halfrauds...
cheers

[exmee46]

hmmmmm...
the top & bottom front suspension swivel joints have an blanking plug instead of a grease nipple on my truck. It's a very short standard m6 bolt (10mm spanner size). I tried using one of the u/j ones but the thread's too fine.
Anybody know where I can get one from? Not Halfrauds...
cheers

See previous thread on this subject http://www.yotasurf.co.uk/forums/showthread.php?t=5296

Cheers

Kev

[jet1749]

Grease nipples from either an engineering tools and equipment merchant, or bearings or transmission supplier. Size is M6, mine were about 30p each for cranked or straight.