Side Light Bulbs

[MikeSurf]

Please help I think I maybe having a blond moment (I can say that coz im blond).

I want to replace the sidelight bulbs and cant workout how to get the !!!!!! bulbs out or even get to them.

I have looked behind the light and cant see any means of getting at them and I have also removed the two low qaulity screws from the side of the lens and it wont come out.

Please help.


Thanks

Mike B

[Smokin]

there are some - push fit studs - 2 of them between side and headlight - a squirt of wd40 and a prise out with a broad flat bladed screwdriver - preferably a broad one

hope this helps

Chris

[AndyLala]

once the push fit studs have been released, ease the side light unit forwards towards the front of the vehicle...

andyL

[Smokin]

did i mention use a broad screwdriver?! doh!

[AndyLala]

My broad won't use a screwdriver, she tells me that is why she has me...


andyL

[MikeSurf]

Thanks, I'll give it a go.

Thanks again.

[Predictable Bob]

Are the 3rd Gen sidelights held with push fit studs too ?

Mine have a single screw on the top attaching them to the headlight but I'm loathe to lean on them too hard until I've got confirmation that there's nothing else holding them on !

Cheers

[Morr]

Are the 3rd Gen sidelights held with push fit studs too ?

Mine have a single screw on the top attaching them to the headlight but I'm loathe to lean on them too hard until I've got confirmation that there's nothing else holding them on !

Cheers

Don't know, when i had change a bulb I took out top screw, spent 5 mins trying to figure out how else it was held on and couldn't, so I cheated by flexing the wheel arch liner slightly and streching in from behind to change it!