If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I think it is pretty widely known that the OEM headlamp wiring is a bit under rated.
I used the existing wiring to trigger two relays, one for hi and one for lo.
This then fed a new "loom" to the head lights
2.5mm multi strand copper cable to new plugs.
The light output was dramatically better.
Then I used Osram Nightbreakers
The light output is as good as my 64 plate Merc.
Even to say that now the additional spots are hardly used.
There is a loom you can buy all made up from a U.S. site but I made my own.
Headlamp connectors and relays from eBay.
I did take pics of the setup but they are on the pc which is a bit poorly
Sorry for the vagueness darn computers
No problem, from what you've said, I assume that the new loom goes from the headlamp connectors to the relays and the original loom connects to the new relays
4Crawler sell some looms, & also have some wiring diagrams on their site - sadly i don't know enough about (or am confident enough to have a go at) electrickery to make one of these up, but you might
I bought a loom from Thailand about 5 years ago, fitted it myself and it made my old headlights look like glow worms. With some new, better, brighter bulbs fitted, all has been well ever since. They are incredibly cheap, but are good quality and have not let me down. Here is a link to (what I think) may be the same set, copied here from Australian eBay site, but might be available on UK site (but they ship worldwide anyway): http://www.ebay.com.au/itm/H4-9003-H...item1e93d59346
Comment