alarm/immobiliser issue!!!

[muddle]

I have a sterling alarm system where you have to put a little black plastic plug into a slot, has 3 prongs and it disables the immobilizer.

Well the issue is one of the prongs on the dash part has broken so I had to pull a wire off to get it to connect so I could drive home.

How can I go about sorting it? I hate immobilizers with a passion as do I hate wiring. Can I het new slot pieces?

[shokenore]

You could try a headphone plug and socket.

[muddle]

How? I'm really not good with wires to be honest, headphones are one pin. It's a flat chip thingy dooey the you have to push into a slot so the alarm disarms

[shokenore]

I had an immobiliser many moons ago and the "key" was the jack and the socket was fitted to the dash.

The socket was wired to match the headphone jack and the circuit was completed when the jack was plugged in.

If you look at the picture you can see the different connections.

[muddle]

Oh right so you wire the 3 wires to the 3 posts then just push in a headphone jack and it should work? Where can I get one of those?

[shokenore]

ebay
www.rs

if you need any help wiring it up give us a shout, have soldering iron can travel

[muddle]

Awesome thanks bud, are they not coded or anything then?

[shokenore]

Awesome thanks bud, are they not coded or anything then?

I think we may at crossed purposes, can you post a pic of the doohickey you plug in?

Ta

[muddle]

I'll text it to you, you receive pics?

[shokenore]

I'll text it to you, you receive pics?

Yes bud.
:

[muddle]

It's ok now bud, got a good friend to remove it for me.

[shokenore]

Glad you got it sorted.