new to group so bare with me after changing starter motor (which works fine now) i now have the "engine management light/red" on constantly, but no "turbo light/green" when u put your foot down, its there when u turn ign on but turbo light goes off & stays off once eng is started, any ideas what iv done wrong ? & how to correct it ? checked all pipes/wires nothing loose or disconnected. any help greatly appreciated.
Announcement
Collapse
No announcement yet.
HELP ! eml/turbo lights
Collapse
X
-
Originally posted by lwb3new to group so bare with me after changing starter motor (which works fine now) i now have the "engine management light/red" on constantly, but no "turbo light/green" when u put your foot down, its there when u turn ign on but turbo light goes off & stays off once eng is started, any ideas what iv done wrong ? & how to correct it ? checked all pipes/wires nothing loose or disconnected. any help greatly appreciated.
Hmmmm although you say nothing is loose I would check again, check all vacuum hoses etc, it definately sounds like something has been dislodged or split.Say not always what you know, but always know what you say.
My 4x4
My choice
Back off
-
thanks 4 getting back 2 me koi, after searching through all the old forums i eventually found the problem "coolant temp sensor" with pics & arrows pointing 2 it "yippeeeeee" musta been knocked when old starter came out. god bless the old forums p.s any u geordie lads on here now no a good garage (must b he's put up with me & surf 4 2 days ) who's not frightened of the dreaded surf !!!!!!!! contact me if u want details.
Comment
Comment