yobit eobot.com

Announcement

Collapse
No announcement yet.

Audio Wiring. Again!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by stormforce View Post
    I do have the blue main blocks also if you need them Tony
    Yes please. Have emailed you.

    Comment


    • #17
      Originally posted by BigBobE View Post
      here you go tony here's your diagram labelled....

      You are both a Gentleman & a Scholar.
      Otherwise known as a 'Diamond Geezer' where I hail from.

      Comment


      • #18
        Thats weird - I'd have assumed the 3 thicker wires (red,yellow,black) on the right of the pic would be the 2 power and earth cables.

        While it's all out you should replace any of the bullets that are positive with a female version so you have less risk of a short while they're unplugged.

        Rob.

        Comment


        • #19
          Originally posted by wishbone View Post
          Thats weird - I'd have assumed the 3 thicker wires (red,yellow,black) on the right of the pic would be the 2 power and earth cables.

          While it's all out you should replace any of the bullets that are positive with a female version so you have less risk of a short while they're unplugged.

          Rob.
          that was my thinking to, so i went and pulled out my stereo, and as i have the toyo to iso adapter mines got each cable labelled, the 3 bigger ones are connected to a second caonnector clock feeding the 2 speakers in the rear...

          Comment


          • #20
            Makes sense - the rears have their own amps, although mine were switched by the aerial connector (was 2 wires connected to 1 'amp remote' on my HU)

            All my speakers are run off amps now so I don't use the original wiring. The original front speakers are now my CB speakers.

            Rob.

            Comment


            • #21
              Originally posted by wishbone View Post
              Thats weird - I'd have assumed the 3 thicker wires (red,yellow,black) on the right of the pic would be the 2 power and earth cables.

              While it's all out you should replace any of the bullets that are positive with a female version so you have less risk of a short while they're unplugged.

              Rob.
              I had realised that & told Robert I needed to do that. Good point raised however. Thanks.
              Tony

              Comment

              Working...
              X