yobit eobot.com

Announcement

Collapse
No announcement yet.

flash test results

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • flash test results

    hi did the E1-TE1 light test today,disconected battery first to clear old codes then did test,
    results were 3 quick flashes(1 second gaps)long space,2 quick flashes again,long space,4 quick flashes again,long space,2 quick flashes,then it repeats again.
    ive looked at codes and am i right that it means,
    32
    AIRFLOW METER SIGNAL (VANE-TYPE)
    --AIRFLOW METER./CIRCUIT

    --ECU
    42
    VEHICLE SPEED SENSOR SIGNAL CIRCUIT--NO SPD. SIGNAL FOR SEVERLA SECONDS
    WHILE VEHICLE IS OPERATED UNDER HEAVY LOAD (TPS/MAP/AIR FLOW INPUTS)

    --SPEED SENSOR/CIRCUIT

    --ECU
    the test was done on my 94-L reg 3.0 2nd gen manual 5 speed.
    is it the ecu that needs replaceing???
    Last edited by maxwell-1; 22 January 2008, 13:43.

  • #2
    any ideas????????????????????????? ???????????
    dont want to replace ecu unless i have to!!!!!

    Comment


    • #3
      There's some generic info here on testing/diagnosing specific sensors. Some of it may be of use:

      http://forums.bauchan.org/portal/vie...ds.php?dcid=14

      Comment


      • #4
        cheers that was very useful,
        dan

        Comment

        Working...
        X