shocks fuse question

[davemaxx]

after installing replacement shocks (es9000's) do you have to remove the fuse for the original ajustable ones?
because the tail ends of the connectors are just hanging free and i dont know if there is any power there and i think they will get wet and short things out if there is.

[stormforce]

after installing replacement shocks (es9000's) do you have to remove the fuse for the original ajustable ones?
because the tail ends of the connectors are just hanging free and i dont know if there is any power there and i think they will get wet and short things out if there is.

Hi Dave.just tape the end of the connectors up or lag them in grease just to stop any water getting in.

I just took the shocks and top caps off from the joining block and left the wires there and keep forgetting to tape them up

[NiftyNev]

There's no power to the wires for the original shocks unless the switch is pressed one way or the other.

Nev

[stormforce]

There's no power to the wires for the original shocks unless the switch is pressed one way or the other.

Nev

thats what i thought but wasn't certain

[davemaxx]

thanx for your help on that one.