3rd Gen Clocks

[marky]

3RD GEN DASHBOARD. Im trying to remove the clocks but there is a lot of resistence, I hope its just a big fat wireing harness that is causing this.
That speed bell needs to come out as its doing my head in, Its behind there somewhere.

[lclascaris]

I had my dash pod out recently to reset the timing belt light. I got it removed in about 15 minutes. It sounds like as say the main dash pod harness that is catching on something. Just be gently with it & it should come out. Make sure all the screws have been removed as some of them are not always easy to see.

[BUSHWHACKER]

3RD GEN DASHBOARD. Im trying to remove the clocks but there is a lot of resistence, I hope its just a big fat wireing harness that is causing this.
That speed bell needs to come out as its doing my head in, Its behind there somewhere.

See if you can pull it out just enough to get a blowlamp behind there, that will shut it up!!

Or some of that expanding foam that's used to disable speed cameras.

[marky]

Ive had the POD bit out a little way but i did'nt want to pull it too hard.