yobit eobot.com

Announcement

Collapse
No announcement yet.

Electric Mirrors Not Working

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Electric Mirrors Not Working

    Does anyone know why my electric mirrors are not working? Just bought a new switch and fitted it today but they still do not work, not sure if it could be the fuse but don't what fuse it could be. I have a 1992 SSR-G Surf 2.4TD. Any help would be much appreciated.
    When the going gets tough...The Surf gets going!!!

  • #2
    It could be a break in the wires where they pass through the door into the cabin.
    Try pressing and holding the mirror switch at the same time as opening the door slowly to see if they work.

    Comment


    • #3
      Originally posted by ninja_king
      Does anyone know why my electric mirrors are not working? Just bought a new switch and fitted it today but they still do not work, not sure if it could be the fuse but don't what fuse it could be. I have a 1992 SSR-G Surf 2.4TD. Any help would be much appreciated.
      Is your clock cig lighter and sterio working? On the 3rd gen they come of the same fuse as the mirrors. The fuse box being don by the drivers side door
      SWIFT AND BOLD

      Comment


      • #4
        did the same on mine turned out to be a dirty connector on the wiring block going into the switch...try giving em a good clean
        DONT RUN WIV BIG DOGS IF U CANT PI** UP TALL TREES

        Comment


        • #5
          Originally posted by charvell
          Is your clock cig lighter and sterio working? On the 3rd gen they come of the same fuse as the mirrors. The fuse box being don by the drivers side door
          Everything else works fine except the mirrors, but I'll try doing what everyone else has advised and I'll keep you posted....Many thanks for the advice
          When the going gets tough...The Surf gets going!!!

          Comment


          • #6
            Update.........Tried all that was suggested but still no good even tried putting a meter across the connections got one reading of 12 volts between 2 pins not sure what the pins are or what they supply. Does anyone have a circuit diagram of the window switch?
            When the going gets tough...The Surf gets going!!!

            Comment

            Working...
            X