yobit eobot.com

Announcement

Collapse
No announcement yet.

through the square window!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • through the square window!

    Right,

    Window (yes that one!)
    will
    drop everytime on both key/button

    but raising it again is a bit hit & miss on either.

    So that must be, a fault posssibly on the relay control dept inside rear wing
    right?

    When I remove load liner tray from back, where will I find clips/screws
    to release this panel

    and


    did I read 'Maplins' sell replacement relays,

    thanks in advance

    Rich

  • #2
    I posted maplins part numbers and pics of the repair in November. Do a search and u will find it.

    Clips/screws. They are everywhere. Your main worry is the rear roof pannel above the window. Pull this of first and it will reveal 2 screws in the top of the load liner pannel. then the seatbelt tidy thing and after this just pull at it and be careful. its an interfrastic job and you will need stacastic capabillities! The relay board is located just behind the black cubby box which is easy to extract once the aforementioned liner is out of the way. Get a desoldering pump from maplins when you buy the relays.

    I could have a liner out in 5 mins having done one already but i bet it will take you half an hour for the first time and you will still break various plastic clips off the moulding.

    Good luk.

    If you need help shout and ill talk u thru it.

    Al.
    I used to have a surf me!

    Comment


    • #3
      cheers

      Right,
      this is likely my next job, given theres a fair chance of success,

      Comment

      Working...
      X