yobit eobot.com

Announcement

Collapse
No announcement yet.

Light on AUTO geat lever

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Light on AUTO geat lever

    The bulb is gone at the Auto gear stick on my 1996 SSRX. How do i get at it to replace? I tried lifting off the strip with P R N D etc but it feels like it's going to break.
    Thanks
    [COLOR=DarkGreen]WITH EVERY PAIR OF HANDS YOU GET A FREE BRAIN[/COLOR]

  • #2
    2 bolts inside armrest cubby...

    then slide that back

    2 screws either side of centre section (the bit with gearstick on) and one on 4wd selector
    then that whole section will slide back and lift up

    that should give you access
    nee nar nee nar, i'm a fire engine!

    Comment


    • #3
      Originally posted by da SLUG man
      2 bolts inside armrest cubby...

      then slide that back

      2 screws either side of centre section (the bit with gearstick on) and one on 4wd selector
      then that whole section will slide back and lift up

      that should give you access


      Better than any Haynes manual this site Aint It
      Laugh!!! I nearly bought my own beer.

      Paul

      Comment


      • #4
        Originally posted by paulh
        Better than any Haynes manual this site Aint It
        only without the helpfull "refitting is the reverse of removal" statement that always helps!!!
        Everyone thinks I'm paranoid!!

        Comment


        • #5
          Originally posted by da SLUG man
          2 bolts inside armrest cubby...

          then slide that back

          2 screws either side of centre section (the bit with gearstick on) and one on 4wd selector
          then that whole section will slide back and lift up

          that should give you access
          Just to add..."Refitting is the reverse of removal"!!!!
          Constantly Striving to Attain Lower Standards

          Comment

          Working...
          X