If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Is that for the 3rd Gen Vince? What you going to do with the truck? Is it getting the V8 or staying original?
I'm going to V8 it over Xmas.
I've fitted the new rad and had to flush the transmission because it was full of 'strawberry milkshake!'
I've driven it up the hill and back and it seems to change gear OK, but the engine doesn't sound right, I think the head needs skimming as a cheap gasket was used when it was changed after it overheated due to the cracked radiator. I can still use the new rad with the V8.
It's going into storage tomorrow anyway until yours is finished then I'll MOT it and drive it 'till it goes bang.
Nice one! Look forward to watching it take shape.
I hope you aren't to far away from the house when it lays down and surrenders
Had a five mile drive in it today taking it to the storage yard and it 'felt' fine.
A bit of hesitation when pulling away though, probably due to the water contamination on the clutch band linings.
Comment