Lexurf VI.

[gary-r]

Yeah, both sensors will need replacing.
It's the trail of brake fluid it left on my mate's drive that was more worrying!

obviously a well looked after example of the breed

my previous owner seemed to be limited to black tape as the repair favourite

iv'e ended up replacing nearly every sensor and all the ignition system on the thing so i'm guessing yours will be much the same .

[an1mal_69]

How you getting on Vince? Any nice rubbery engine mounts liberated yet

[BUSHWHACKER]

How you getting on Vince? Any nice rubbery engine mounts liberated yet

No, sorry.

I was being all careful not to damage them on removal and there was no need, they were broken anyway. The weight of the engine was holding them together.

I'm stripping another LS tomorrow, it's a 1996 so the mounts should be in better condition.

[an1mal_69]

Oh no..damn those pesky mounts.!!

[jmc]

No, sorry.

I was being all careful not to damage them on removal and there was no need, they were broken anyway. The weight of the engine was holding them together.

I'm stripping another LS tomorrow, it's a 1996 so the mounts should be in better condition.

Ooh, very new.

Is that a VVT-i then?

[an1mal_69]

Now then Vince, me ol' cock sparra'.. any positive, rubbery news

[BUSHWHACKER]

Now then Vince, me ol' cock sparra'.. any positive, rubbery news

I'll let you know before lunch tomorrow. The nuts came undone easy enough from underneath so fingers crossed they should be in good condition. They're on a 1996 Ls400, me ol' skipjack!

[an1mal_69]

LOL.. Rather be a cock sparra' than a skipjack!

Exciting! I'll have everything crossed..

[BUSHWHACKER]

LOL.. Rather be a cock sparra' than a skipjack!

Exciting! I'll have everything crossed..

Only one of the mounts survived.
The other was stuck to the crossmember underneath as I lifted the engine out, even though I had removed the nut.
Do you still want it?

There's loads of LS400 breakers of Ebay. Just type-LS400 breaking- into the search on Ebay.

[flounderbout]

It's the 9th April this Saturday isn't it? Woohoo! That is when Lexurf VI is ready according to this 'ere PM I got from Vince last month!


Best I toddle off and buy my train ticket... See you on Saturday...

[an1mal_69]

Only one of the mounts survived.
The other was stuck to the crossmember underneath as I lifted the engine out, even though I had removed the nut.
Do you still want it?

There's loads of LS400 breakers of Ebay. Just type-LS400 breaking- into the search on Ebay.

Niiiice, send it Vince, send it! I have one here anyways.

Addy' is

21 Caroline rd
Llandudno
Conwy
LL30 2TY

Let me know how much cash money you want too and I'll zap it over

[gary-r]

It's the 9th April this Saturday isn't it? Woohoo! That is when Lexurf VI is ready according to this 'ere PM I got from Vince last month!


Best I toddle off and buy my train ticket... See you on Saturday...

patience is a virtue young man -

i heard the lexurfdom elves had a week off on the ####

[flounderbout]

patience is a virtue young man -

i heard the lexurfdom elves had a week off on the ####

I know I am just teasing. You can't rush genius!
Seriously Vince there is no hurry - I know you have been flat out.
Though I hope there will be some more pics soon!!!

[BUSHWHACKER]

ETA for some update pics, Saturday evening.

I've been modifying the back lighting of your dash clocks, as I read one of your posts stating that you would like white backlit gauges. I've done it so it lights up LS400 style and invisible when the ignition is off.
Just waiting for the new LEDs to arrive before I can photograph it.

[flounderbout]

ETA for some update pics, Saturday evening.

I've been modifying the back lighting of your dash clocks, as I read one of your posts stating that you would like white backlit gauges. I've done it so it lights up LS400 style and invisible when the ignition is off.
Just waiting for the new LEDs to arrive before I can photograph it.

Cool! Sounds awesome... Can't wait to see some pics.