Kzn130 main prop shaft fitting

[Nastynick]

Mornin all.

I have a 1995 3.0 litre SSRX KZN130 that I bought with no prop shaft.

I now have a prop shaft to fit and wondered if there is anything I need to know or if you have any helpful tips for me before I just bolt it on........

Eg:
Alignment
Locktite bolts/nuts
Greasing

Cheers.

Nick.

[glennyboy]

Hi nick the prop is pretty straight forward , you can probably see on the flanges where it was bolted to your truck previously , clean both flanges with a wire wheel or brush to ensure it sits flush , grease the Ujs ,little bit of lock tight won't hurt then bolt it up oh don't overdo the grease on the front as its a sliding shaft , do you know why it was removed in the first place ?