yobit eobot.com

Announcement

Collapse
No announcement yet.

Is there a knack to removing the front wiper arms?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by gwh200 View Post
    I want pictures or this is all a dream.
    Pictures of my flaring block? Or me popping one off?
    Eat.Sleep.Surf.Repeat.

    Comment


    • #17
      Undo the nut a couple of turns, grab a pair of water pump pliers and put one jaw under the arm and the other on top of the nut and squeeze.
      Liberal amounts of plus gas will assist.
      HTH
      Smith & Wesson: the first point & click interface

      Comment


      • #18
        Update: Job done!

        Using my home-made puller, WD40 and patience...they finally came off. Refurb ones on and ready to go.

        And Andy...thanks for sorting me some nuts Got a normal one doing the job at the moment.

        Thanks for all the input guys

        Comment


        • #19
          Originally posted by Sylux View Post
          Update: Job done!

          Using my home-made puller, WD40 and patience...they finally came off. Refurb ones on and ready to go.

          And Andy...thanks for sorting me some nuts Got a normal one doing the job at the moment.

          Thanks for all the input guys
          Pic of the result please!!!!

          other half took your nuts to post box today....

          Comment


          • #20
            Originally posted by Sylux View Post
            Update: Job done!

            Using my home-made puller, WD40 and patience...they finally came off. Refurb ones on and ready to go.

            And Andy...thanks for sorting me some nuts Got a normal one doing the job at the moment.

            Thanks for all the input guys

            No pictures = original poster wears his wifes knickers.
            Non intercooled nothing.

            Comment


            • #21


              I'll look like a right knacker taking pics of windscreen wipers...but will for the lads!

              Prepare to be underwhelmed.

              Comment


              • #22
                The ones I removed and that inspired the need to clean up.

                Other side was worse...but photo is too blurry.

                Staring at the rust, every time I drove, ####ed me off.



                Pretty normal and expected end rust.



                The ones I got from Andy were not as bad (had sound bodies)...but still needed the works. While I was doing them the above stayed on the truck doing their job.

                Finished result. Underwhelming...but they are just wipers Lots of Summer dust but no Winter rust



                Back one was shocking. Nearly bought a new one but I've just enough paint to make the effort. Off now to pop on the clear coat. Wish I've taken a before pic.

                Comment


                • #23
                  Nicely done chap.
                  Those rear ones seem to dissolve really badly...

                  Comment


                  • #24
                    I am totally in awe...and Sylux still wears frillies.
                    Non intercooled nothing.

                    Comment

                    Working...
                    X