yobit eobot.com

Announcement

Collapse
No announcement yet.

Can't engage 4WD...advice please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Can't engage 4WD...advice please

    Bit of a sneaky thread this as although I have a KZN185 Gen 3 the problem mentioned is actually on a 4Runner 3.0 td 1993- I've no idea if posts concerning these are normally welcome but as a lot of the mechanicals are the same, i'm losing nothing by trying; the 4Runner forum has not solved the issue.
    bought the 4Runner recently and was a tad complacent, didn't check the 4wd "its a Toyota, of course it'll be working"....tried engaging either low or high4 recently in snow and zilch...no dash light, and only rear wheels biting.
    Have taken it to a garage that usually does my MOT's and they couldn't identify the problem; all I've gleaned so far is that it may be an ADD vacuum switch but as I'm waiting for a workshop manual to be delivered I don't know yet where it is situated, can anyone advise, thanks

  • #2
    Loads of articles to download here....
    http://www.toyotasurf.asn.au/techsite/downloads.htm

    See here to cure the vacuum problem....
    http://www.hiluxsurf.co.uk/showthread.php?t=66744

    Comment


    • #3
      sorry for the thread hijack
      Originally posted by BUSHWHACKER View Post
      See here to cure the vacuum problem....
      http://www.hiluxsurf.co.uk/showthread.php?t=66744
      does that ADD mod work on 3rd gen's with multi mode awd??
      still havent had chance to have look at mine

      Comment

      Working...
      X