gearbox lockup switch

[kobelco]

was wondering if anybody who has done the lockup selonoid switch could tell me were they conected the wires {ecu or wiring loom}
am having a bit of trouble locating the right wire as manual states that it is pin 1 off plug 1 on ecu, but states that it is a pink wire, on my ecu that pin has green wire.
Any help greatly apprecited.
forgot to mention is a KZN185 3.0 LITRE
THANKS peter

[Hazzo]

Think the mod is on the 2 gen, but can be traced back/forward I think, you'll need to suss it out from the case end. H

[kobelco]

thanks for the reply hazzo. does anybody no were the wiring enter the body loom may be able to conect into there dont relly want to cut wires by the ecu if i can help it.
thanks peter

[Paul1566]

This is the second gen mod......
http://www.hiluxsurf.co.uk/forums/sh...ad.php?t=59241

still aint dunn it cus i is lazy........

[kobelco]

all done now guys ,thanks for the help