bolts removal urgent please help

[sketty]

does anyone now how to take the top 2 bolts off the gearbox bell houseing.
do i have to take the back 2 engine mounts off so engine and gearbox tilt back a little further.


please please please

[stormforce]

It is a pain on the 3.0l if theres not a bodylift done.I have just done this myself yesterday on the breaker to get the starter out aswell.If the truck is a breaker take the head of and you can get to the easy if not i ain't a clue at the mo

[Diezel Weazel]

(Without head removal)
You might try a combination spanner (ya might have to Kink/bend it slightly) so the ring end fits the bolthead n put another on top of the open end n use as a lever....
Good luck

There's always a Payback .... Ya just never ever see it Comin !!!!!

[sketty]

cheers lads gonna need some luck
started at 3 yesterday finished at 11:30
starting again now and weather dont look to good

[laser_jock99]

One of the reasons for doing a 2" bodylift- makes a lot of these jobs a doddle!

[sketty]

Thanks
Sorted It Used Gearbox Own Weight To Tilt Engine Slightly Then Used Extension Bar And Knuckle Joint Then Went In From Inside Cab Through Hole Left Were Gear Levers Pop Through Body. It Was A Doddle Then.
Me Clutch Is Buggered And Me Fly Wheel Spinning Seperatly So That Gone Aswell Gonna Ring Roughtrax For New Ones.

[goprisko]

Part Numbers

When you find the replacement parts, please post the part numbers here,
and email them to me at goprisko@iway.na

Thanks,

INDY

[sketty]

ok will do

[sketty]

When you find the replacement parts, please post the part numbers here,
and email them to me at goprisko@iway.na

Thanks,

INDY

parts come today

part numbers are

3.0L TD SOLID FLYWHEEL CONVERSION KIT (CL008) £365 +VAT
CLUTCH SPIGOT BEARING (CL016) £5 +VAT
DELIVERY NEXT DAY £8.25
TOTAL £443.01