Air Intake Hose

[RAPTOR]

Could any of you kind souls point me in the right direction for an air intake hose as mine has split, i have had a look around roughtrax, milners ect and cannot seem to locate one or is of to the nearest toyota dealer to get one.

cheers

[The Lang-Shankit Scunner]

Just replace it with some correct diameter metal duct hose! Its cheap and airtight and looks shiny

[BUSHWHACKER]

Could any of you kind souls point me in the right direction for an air intake hose as mine has split, i have had a look around roughtrax, milners ect and cannot seem to locate one or is of to the nearest toyota dealer to get one.

cheers

It's basically the same as the 2nd gen 3.0...........

http://www.toyotahilux.com/?doc=11&cid=615

[jbzota]

Hi there, Mine recently cracked and managed to find a cheap option. Local exhaust specialist flared out a 65 mm (2 1/2 inch I think?) exhaust pipe, length of flare was enough to join two halves of inlet pipe. Now cut thru crack and rejoined using short piece of exhaust tubing and two clamps. Pipe was flared from 65mm to 70mm for a perfect fit for the two halves to slide on neatly with help from a smear of grease.Probably being done before but worked for me.

Require: Sharp Knife (cut thru cracked rubber hose)
70 mm outside diameter exh tube 2" long
2 x Hose clamps to fit over the cracked hose

[RAPTOR]

cheers fella's i will try the DIY option if that dont work i'll get me self a proper one.