Tweet
hello peeps iam a bit stuck at the moment and was wondering if anybody could shed some light on this problem ive got kzn130 and last week noticed a coolant leak around the top of the rad checked everything out and put it down to the rad near the filler and the frame around the rad had came lose so i ordered a new aluminum rad ,thermostat top and bottom hose and new coolant.i fitted everything as per forum guides through the heater matrix on the bulk head with the heater set to open but iam still getting coolant after a run on top of the rad not but a lot the truck is running fine with no overheating has anybody got any ideas why this is still happening many thanks
Comment