yobit eobot.com

Announcement

Collapse
No announcement yet.

help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • help

    i have a ln130 2.4 manual i have a problem with the injection pump i have not got any fuel going to the injectors but they his fuel in the injection pump

  • #2
    I had this and it turned out to be a dodgy connectoin with my immobiliser system, wasnt alliwing fuel past the spill control valve.
    well, that was a bad idea!

    Comment


    • #3
      Originally posted by muddle View Post
      I had this and it turned out to be a dodgy connectoin with my immobiliser system, wasnt alliwing fuel past the spill control valve.
      thanks ill try and find it

      Comment


      • #4
        Originally posted by muddle View Post
        I had this and it turned out to be a dodgy connectoin with my immobiliser system, wasnt alliwing fuel past the spill control valve.
        had immobiliser removed still want start fitted an other injection pump and an other ecu still no joy

        Comment


        • #5
          Is it still not reaching the injectors? Undo the pipes at tge back of the pump and see if fuel come out from there, have you checked if fuel is still getting to the pump? There is a nut ontop, if you loosen it a bit then pump the primer it should spill out.
          well, that was a bad idea!

          Comment

          Working...
          X