yobit eobot.com

Announcement

Collapse
No announcement yet.

Any ideas ???/

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Any ideas ???/

    Hiya guys
    Recently my surf has developed a little problem and was wondering if you experts could maybe point me in the right direction as what the problem maybe ??.
    Ok
    First thing in the morning when i turn the car over after letting the relay go off turn the ignition and she fires ,shes a little lumpy for a couple of seconds but after that fine no probs at all.Now when im coming home from work starts the same as the morning however Ive noticed that the revs go up slightly just under 1000 and fluctuates sounds to me like its hunting revs go up and down .Now tonight a very strange thing happened when i was coming home the engine check light come on but the turbo light wasn't coming on and i was doing about 60ish,so any ideas please ??.I should also say that I have recently give it a damn good service ,new air filter new Glow plugs oil change .
    Regards
    Shaun

  • #2
    Check for fault codes and tell us what they are.
    Do you know that, with a 50 character limit, it's

    Comment


    • #3
      Originally posted by Albannach View Post
      Check for fault codes and tell us what they are.
      Ok im really gunna show my ignorance now m8 how do I do this ? Do I need some special bit of kit to read the faults ?

      cheers for the reply
      Shaun

      Comment


      • #4
        http://www.hiluxsurf.co.uk/forums/showthread.php?t=62
        Do you know that, with a 50 character limit, it's

        Comment


        • #5
          lol already found it m8 ,Ill have a look and let you know what the fault code is


          cheers

          Comment


          • #6
            just a thought but when were the filters etc last changed
            https://www.facebook.com/groups/henpals/

            Comment


            • #7
              Engine light on and no turbo light. Check the turbo sensor is connected and the vacumn pipe is on. It's right by the air filter.
              Non intercooled nothing.

              Comment


              • #8
                Originally posted by allodaley View Post
                lol already found it m8
                That's not an endearing comment. Don't ever laugh at me for helping, or call me m8 again.
                Do you know that, with a 50 character limit, it's

                Comment


                • #9
                  Originally posted by Albannach View Post
                  That's not an endearing comment. Don't ever laugh at me for helping, or call me m8 again.
                  Hey hang on ,calm down ,didnt mean it to be an offencive comment ,I meant id already found the link and you had posted after i found it , jezz ,and by the way i appreciate the help

                  cheers

                  Shaun

                  Comment


                  • #10
                    Originally posted by stormforce View Post
                    just a thought but when were the filters etc last changed

                    filters have just been changed on the service i done last week Richard ,are there other filters that i may have missed ??

                    shaun

                    Comment


                    • #11
                      Just a little update here

                      Mangaed to get a fault code but if im honest im not a 100% sure what it means . I get 2 blinks then a pause then another 4 blinks ,now does this mean I have two errors which are
                      2 - Turbo boost pressure sensor (2 blinks)
                      4 - Coolant temperature sensor (4 blinks)
                      cheers
                      Shaun

                      Comment


                      • #12
                        Hi Shaun.I just got the email which came through a bit wierd for an email.Anyway i would disconnect the batteries to reset the ecu and then do the fault codes again just to make sure there are 2 faults.I should have a 3.0l turbo pressure sensor here if needed but i got no coolant sensors though
                        edit.sorry i meant 2.4 turbo ps
                        Last edited by stormforce; 25 August 2010, 09:52.
                        https://www.facebook.com/groups/henpals/

                        Comment


                        • #13
                          Originally posted by stormforce View Post
                          Hi Shaun.I just got the email which came through a bit wierd for an email.Anyway i would disconnect the batteries to reset the ecu and then do the fault codes again just to make sure there are 2 faults.I should have a 3.0l turbo pressure sensor here if needed but i got no coolant sensors though
                          edit.sorry i meant 2.4 turbo ps
                          Thanks for that Richard ,Ill disconnect the batteries then to clear the codes .Was I right in my assumption of the blinks ??
                          cheers
                          Shaun

                          Comment


                          • #14
                            From what i have read yes.There should be a full list on here of the fault codes which i keep forgetting to save and have to search the forum everytime to find them lol
                            https://www.facebook.com/groups/henpals/

                            Comment


                            • #15
                              http://www.toyotasurf.asn.au/techsite/downloads.htm

                              Comment

                              Working...
                              X