its not budging....!!

[speedymacfish]

Any ideas how i can get this off....?? the bottom timing belt cog so i can take out the crank shaft!!

[lord lucan]

Any ideas how i can get this off....?? the bottom timing belt cog so i can take out the crank shaft!!

take out the other woodruth key, blo torch on the crank sprocket

[speedymacfish]

nope... still not budging.... I'm off to bed... back at it early early in the morning...!!!!!

[speedymacfish]

right........... there has to be something else holding this cog on....!!! i've burned it to death, had a crow bar and sledge hammer on it...!!!!!!! any ideas..??

[Chillitt]

Why not just get a 2.4 engine with a cracked head and put yours on it? Got to be cheaper than rebuilding yours...(assuming your head survived...)

[speedymacfish]

only needs big end and small end bearings.... but need the crank shaft out to get underneath it...

[Chillitt]

only needs big end and small end bearings.... but need the crank shaft out to get underneath it...

And an oil pump and all the oil feeds cleaning out...

[speedymacfish]

crank is out....!!! had to take off the front.... going to open up the oil pump now....