yobit eobot.com

Announcement

Collapse
No announcement yet.

Turbo light not coming on ? and max 75mph

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by marky
    has anyone got the pipe fitment picture for hal
    Start here
    http://www.toyotasurf.asn.au/techsite/turbovacuum.htm
    Pete

    Comment


    • #17
      as tony says trace pipes back & check for splits
      (\__/)
      (='.'=) SQUIRREL MUNCHER GRRRRRRR
      (")_(")

      Comment


      • #18
        I have just found a pipe to the right of the turbo is not attatched to anything ...I have just taken a couple of pics and will post them after I have lowered their res

        Comment


        • #19
          GOOD CALL
          (\__/)
          (='.'=) SQUIRREL MUNCHER GRRRRRRR
          (")_(")

          Comment


          • #20
            This is the pipe I found[
            Attached Files

            Comment


            • #21
              that pipe should attach to the denso sensor on the side of the air filter casing
              (\__/)
              (='.'=) SQUIRREL MUNCHER GRRRRRRR
              (")_(")

              Comment


              • #22
                which should be just below your arrow a little square box
                (\__/)
                (='.'=) SQUIRREL MUNCHER GRRRRRRR
                (")_(")

                Comment


                • #23
                  Thanx ..would it affect the turbo in any way ...also where that pipe comes from it looks like another pipe should attach ?

                  Comment


                  • #24
                    its dark & my torch is flat but that end connects to the sensor on the side like i said try it connected & take it for a spin
                    (\__/)
                    (='.'=) SQUIRREL MUNCHER GRRRRRRR
                    (")_(")

                    Comment


                    • #25
                      Just tried it and I can here turbo kick in now ...but no light on dash

                      Comment


                      • #26
                        Originally posted by halkewl
                        Just tried it and I can here turbo kick in now ...but no light on dash
                        how does it perform now hal
                        (\__/)
                        (='.'=) SQUIRREL MUNCHER GRRRRRRR
                        (")_(")

                        Comment


                        • #27
                          Seems to be the same ...the turbo its like a warble not a whistle is that right ..here it about 2000revs ..I couldnt take it on a long run though so maybe their is a diference.

                          Comment


                          • #28
                            it should whistle. i think someones been messing about with the pipes & not put them back correctly
                            (\__/)
                            (='.'=) SQUIRREL MUNCHER GRRRRRRR
                            (")_(")

                            Comment


                            • #29
                              Hal

                              Have you looked at the link I sent you in post 16. It shows the pipes. Looks like the one in your pic to me.
                              Pete

                              Comment


                              • #30
                                Originally posted by Pete
                                petes right there is another pipe out of its place
                                (\__/)
                                (='.'=) SQUIRREL MUNCHER GRRRRRRR
                                (")_(")

                                Comment

                                Working...
                                X