sump guard fixings

[gwh200]

does anyone know the size of the fittings used to fix the original sump guard back on,i appear to have.....ahem ,mislaid mine,and cannot for the life of me figure out the size

[BUSHWHACKER]

does anyone know the size of the fittings used to fix the original sump guard back on,i appear to have.....ahem ,mislaid mine,and cannot for the life of me figure out the size

I'm sure they're M10, but fine thread.

[gwh200]

I'm sure they're M10, but fine thread.

cheers vince,is that for all 4 fittings

[BUSHWHACKER]

cheers vince,is that for all 4 fittings

Hold it, M10 fine may be for the winch plate mountings.


OK, just been out to check, there are M8 threaded holes there too, I just tried a bolt. (no bashplate)




So to sum up...............You need a handfull of M8 bolts, about 20mm long.

[NiftyNev]

12mm socket, so if I remember correctly, that would make them M8. 1.25mm pitch I would say without checking.

Nev

[NiftyNev]

Checked the original bolts which I have here. They are 8mm X 1.25 pitch. Pitch checked with thread gauge. Length is 30mm with captive washer.

Nev

[gwh200]

12mm socket, so if I remember correctly, that would make them M8. 1.25mm pitch I would say without checking.

Nev

thanks vince/nev,

what would we do without you

[BUSHWHACKER]

thanks vince/nev,

what would we do without you

Lose yer nuts too?

[gwh200]

Lose yer nuts too?

woah!!!!

easy tiger!!!!

[Woodzie]

Lose yer nuts too?

I put them somwhere in the back with the guard .............They are probably covered in poo now