yobit eobot.com

Announcement

Collapse
No announcement yet.

lsd's

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • lsd's

    right I have the chance of some landcruiser axles out of an 88 2.4td swb manual
    which have the lsd's on them do they fit the surf?
    89/90 2.4td manual??????????

  • #2
    Originally posted by spoofer28
    right I have the chance of some landcruiser axles out of an 88 2.4td swb manual
    which have the lsd's on them do they fit the surf?
    89/90 2.4td manual??????????
    Not easily. Axles are wider and have different mounts. The actual diff should fit though in your rear axle though, but then the ratio will have to be the same as your front diff to work.

    4x4toys.co.uk - Keeping you on and off the road...

    Comment


    • #3
      the plan was to switch the two diffs if possible

      Comment


      • #4
        Originally posted by spoofer28
        the plan was to switch the two diffs if possible
        OK in the rear, but the LC front diff won't fit your front axle, so unless you gear ratio is the same as the Cruisers, you 4WD will be stuffed if you just swap the rear.

        You could always regear the front to match the Cruisers rear diff.

        Do you actually know what gear ratio is in the Cruiser or you truck?

        All of this is assuming its got 8" diffs and solid axles like most 70 series Cruisers I've seen, you don't say, and I'm no expert on Land Cruisers yet.

        If its one of the bigger 60 or 80 series trucks, it could be different, I think they have 9.5" diffs anyway.
        4x4toys.co.uk - Keeping you on and off the road...

        Comment


        • #5
          hi mate,
          cant you just fit a lsd out of a surf,
          it would save a lot of mucking about,
          i have 2 rear lsd spare as i fitted an arb air locker to mine

          Comment

          Working...
          X