Tweet
Anyone know how far a 2.4 can be rebored to increase capacity, if at all.
Or is it all down to conrods and crank throw?
Or is it all down to conrods and crank throw?
-
I NEED TO OFFROAD! -
I think the oversize pistons for a 2.4 are 0.50mm so very little increase in capacity. Stroke and bore on a 2.4 is 92mm. A 3L has a stroke and bore of 96mm. I doubt that 3L pistons can be used in a 2.4 but would be interested to know if it would work with a 2.4 crank giving a bore of 96mm and a stroke of 92mm. No idea what the compression figures for this would be.
Nev -
STEVO has looked into this & says it is possible. Give him a ringOriginally posted by Danno
(\__/)
(='.'=) SQUIRREL MUNCHER GRRRRRRR
(")_(")Comment
Comment