yobit eobot.com

Announcement

Collapse
No announcement yet.

vacuum pipes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • vacuum pipes

    hi , i purchased an early surf 1992 that was already stripped down, after a total rebuild it runs fine,but there are two vacuum pipes coming from near the starter that joins a metal pipe, iwould like a picture of this please, how its located and were the rubber pipes go to from the other end.i have searched the site but can only find pictures of the turbo boost pipe.i think the later 2.4 are different.if the pictures cant be put up here my email address is snailpaceracing@btconnect.com many thanks.
    JAP4X4PART ¬ THE BIGGEST SURF BREAKER IN THE UK ¬

  • #2
    Assume your talking about the metal pipe that runs across the top of the engine??????
    Attached Files
    Say not always what you know, but always know what you say.

    My 4x4
    My choice
    Back off

    Comment


    • #3
      Originally posted by Koi
      Assume your talking about the metal pipe that runs across the top of the engine??????
      no its two pipes that then split into three about 3mm thick?
      JAP4X4PART ¬ THE BIGGEST SURF BREAKER IN THE UK ¬

      Comment


      • #4
        Originally posted by terry edgley
        no its two pipes that then split into three about 3mm thick?
        this pic isn,t too clear will try and find a better one later
        Attached Files

        Comment


        • #5
          Originally posted by jamsironwork
          this pic isn,t too clear will try and find a better one later
          thanks for that,thats the best pic i have seen of the pipe but if you can get any more it will be much appreciated,thanks again for taking time out to help.
          JAP4X4PART ¬ THE BIGGEST SURF BREAKER IN THE UK ¬

          Comment

          Working...
          X