Damsel in the Dark Help

[LottieS16]

Hello All,

Snoop has left me in charge of our big baby while he is away working!

And the headlight has gone and I have had a look but it looks like I have to take 1/2 the engine apart to get to the bulb is htis right??

Can somone help me please, I noticed 2 users live in Haywards Heath I work there so if I can meet with one of you perhaps you can show me or if you see a one eyed Surf flash me!!

If not can someone write me a dummies guide also what bulb do I need I was thinking take the old one out and get a new one but I can't get in to the headlight!!

Please help as it's getting darker by the day

Lottie xx

[kitesurf_phil]

Maybe this will help?


http://www.yotasurf-online.co.uk/pub...nging+headlamp

[andy]

Hello All,

Snoop has left me in charge of our big baby while he is away working!

And the headlight has gone and I have had a look but it looks like I have to take 1/2 the engine apart to get to the bulb is htis right??

Can somone help me please, I noticed 2 users live in Haywards Heath I work there so if I can meet with one of you perhaps you can show me or if you see a one eyed Surf flash me!!

If not can someone write me a dummies guide also what bulb do I need I was thinking take the old one out and get a new one but I can't get in to the headlight!!

Please help as it's getting darker by the day

Lottie xx

I'm off for the next few days so could change them for you, give me a shout if thats any use to you.

[LottieS16]

Brilliant after looking at that other thread I realise you do have to take half the car to pieces so any help greatly recieved!!

I have sent you a PM!

No I haven't cos I don't have enough privalidges!! Err Can you give me a bell on 07810 860950 then!

Lottie

[poppy986]

Hi Lottie
If it's the older type 2nd gen (non areo) you can undo 4 screws
per head light to get to the bulb with out taking the grill off
etc.
You will need a long possidrive though to reach.
If it the areo type I can not help on that one..
Chris

[djcazyp]

Hi Lottie
If it's the older type 2nd gen (non areo) you can undo 4 screws
per head light to get to the bulb with out taking the grill off
etc.
You will need a long possidrive though to reach.
If it the areo type I can not help on that one..
Chris

L reg 3.0... I can't see any screws from the front....? Help please..

[Guest]

L reg is the Aero type, you need to move the batteries out of the way and go in from behind. Alternatively you can very carefully remove the grille - remove the sidelamp units, unclip the grill (I think 6 clips) and then unbolt the headlamp units (3 bolts) and pull forward then change the bulb and reassemble.

Cheers

[NiftyNev]

Before you rip out the headlight have a look at the fuse.The 2.4s have a seperate fuse for left and right headlights.Maybe the 3 ltr is the same.

Neville