Calling those with 2nd gens with 2" body and 2" suspension lifts...

[pyemaster]

Hi all

If you've got a 2nd Gen with 15" wheels and a 2" body and 2" suspension lift, could you possibly do me a favour and measure the distance between the top of the metal wheel and the underneath of your wheel arch, front and rear?

I'm trying to figure out whether the rear springs I have are standard or extended. They're meant to be standard but seem to give a taller ride height than the extended ones. It would be good to get a sense of the rim-to-arch gap other people are running.

Thanks
Owen

[pyemaster]

Anyone?

Owen

[POPEYE]

I have a 2in body and sus lift but 13in rims and 33's, wouldn't have thought too many 2nd gens have 15in wheels fitted.

[ThatGuy]

I've got exactly what your after, I'll measure it later for you and give you the numbers

[NiftyNev]

I have a 2in body and sus lift but 13in rims and 33's, wouldn't have thought too many 2nd gens have 15in wheels fitted.

Are you sure about this?

Nev.

[ThatGuy]

So mine is front 16.25" and the rears are 16.5" hopefully that helps

[POPEYE]

Are you sure about this?

Nev.

your right! I'm old and get confused, f##k knows where I got 13in from,
mine are 15 with 33's, probably time I stopped posting without thinking about it

[pyemaster]

Cheers fellas, Popeye would you be able to measure yours if you get a min too? I'd be keen to know your numbers!

Thanks
Owen

[pyemaster]

Also ThatGuy, do you have any aftermarket bumpers, etc, or are you running relatively stock weight front and rear?

Owen

[NiftyNev]

your right! I'm old and get confused, f##k knows where I got 13in from,

We all have those moments occasionally.

Nev.

[charvell]

have your torsion bars be wound up at the front?

[POPEYE]

Cheers fellas, Popeye would you be able to measure yours if you get a min too? I'd be keen to know your numbers!

Thanks
Owen

Will do mate, just had my pills and pint of Sanatogen so i'll do it in the morning

[POPEYE]

I have 45cm at the rear and 40.5 front, however I have LC springs on so I think the rear is just over a 2" lift, more like 3"

[pyemaster]

Thanks chaps, useful to know. Do you run stock bumpers mate, or have winch, rear carrier, etc on?

Owen

[POPEYE]

Thanks chaps, useful to know. Do you run stock bumpers mate, or have winch, rear carrier, etc on?

Owen

Myself I have a winch but not a winch bumper and a rear swing out carrier, 9it used to be under slung but I prefer the swing out one).