Height??

[Nkerridge]

Chaps
Just went to garage to get tracking checked as it's not quite right, and the man said he could do the check as the front end was low on one side? And he was correct!! Can anybody Enlighten me what the cause is.

Nick

[budweiser]

you might need to adjust the torsion bars to have equal hight in both sides on the front

[Nkerridge]

!!!!!! F@&k cheers bud

[tweak'e]

its usually the drivers side that sags.
the other thing to check is the shocks. some of the aftermarket ones have decent gas pressure in them and will lift the vehicle a bit. if one shock has gone it will lean slightly.

[Nkerridge]

Now ordered two fronts from roughtrax so hopefully it will cure it. Strange that it affect tracking?

[budweiser]

Now ordered two fronts from roughtrax so hopefully it will cure it. Strange that it affect tracking?

shocks?

did you checked the bars?

[Nkerridge]

No I haven't mate ? Maybe I should had the old for 13 years and never thought about it. I have to jack her her up before adjusting if I remember rightly, am I right?

[NiftyNev]

Yes, jack front up to take load of the torsion bars or bolts may snap. Spray some sort of lubricant on the bolts for a few days before. Sometimes they seize and can snap anyway, but hopefully they will be ok. Make sure you are not directly inline with a bolt because if they do snap, there's a bit of force behind them.

Nev.