yobit eobot.com

Announcement

Collapse
No announcement yet.

Any Surf Owners on the Isle of Wight - Need Help - Please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Any Surf Owners on the Isle of Wight - Need Help - Please

    Hi.

    Is there any handy Surf Owners on the Isle of Wight that could come and have a look at my 2.4 Surf,

    It's got the normal Diesel Fuel Leak

    and was wondering if someone could come and have a look and either help with the repair or repair it for us,

    I'm willing to pay for the time,

    I've ordered a Fuel Pump Repair Kit.

    Thanks Chaps

    Oh I'm based in Freshwater
    Last edited by MrPH; 22 April 2015, 10:35.

  • #2
    Hi & where is it leaking from?

    If its the top it can be done in situ (just mind the little cable inside) and this is pretty helpful ....http://www.toyotasurf.asn.au/techsite/fuelpump.htm, if its underneath......http://www.hiluxsurf.co.uk/showthread.php?t=41465.... If i remember right you need a 32" spanner to get the valve 'nut' off (sorry cant remember the proper term)and some hex keys for the 4 bolts on the top.

    My truck had a leak from the top ...... replaced the seals......then i think this caused the other internal seals to fail (sods law)......had to take the pump to a diesel specialist (boat shop) for the recon of the pump... was worth it though and haven't had any issues since.

    Hope this is of help

    Rob
    Last edited by wiggy; 22 April 2015, 13:55.
    The sh$t gets deeper ...but still swimming

    Comment


    • #3
      Just to add to what rob has said....I'd recomend the Allen keys on a socket rather than a standard key, I found with mine that the off centre pulling nature of the standard key is more inclined to round them off.
      Last edited by andyverran; 23 April 2015, 21:59.

      Comment


      • #4
        Originally posted by andyverran View Post
        Just to add to what rob has said....I'd recommend the Allen keys on a socket rather than a standard key, I found with mine that the off centre pulling nature of the standard key is more inclined to round them off.
        Aye Andy's right about the key's.

        Rob
        The sh$t gets deeper ...but still swimming

        Comment


        • #5
          Right,

          I've gone for it

          I've ordered the following lot:
          • Engine Thermostat
          • Engine Water Pump
          • 2x Bottom Radiator Hose
          • Top Radiator Hose
          • Air-Con Belt
          • Timing Belt Kit
          • With Tensioners + Idlers
          • Pulley Spring
          • Engine Fan Belt
          • Power Steering Belt
          • Rocker Cover Gasket
          • Front Brake Discs
          • Front Brake Pads
          • Front Brake Fitting Kit
          • Rear Brake Drums
          • Rear Shoes
          • Rear Brake Fitting Kit
          • Manual
          • + Fuel Pump Overhaul Kit


          I know it sounds like a overkill for a Fuel Leak

          But I might as well do all the gaskets and when you do that you might as well do the following:
          • Change Cam Belt - Better Safe Than Sorry
          • Change the Water Pump - I'm Local to it
          • Change the Radiator Hoses - Might as Well
          • Replace All Gaskets on Fuel Pump - Safer Than Sorry
          • Change The Other Belts - Safer Than Sorry
          • Change The Coolant / Anti-Freeze - God Knows When That Was Last Done
          • Blank Off The EGR Valve - In the Same Area
          • Replace Rocker Cover Gasket - Its Old & Brittle - Like Me I Suppose
          • Change All The Breaks - If I didn't Have Enough To Do Already


          Well at least I'll busy Next Weekend doing this lot.....

          Wish Us Luck
          Last edited by MrPH; 24 April 2015, 21:47.

          Comment


          • #6
            Seems like a good plan...

            good luck.

            Comment

            Working...
            X