If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
OK, the replacement transmission arrives soon and I've ordered a new filter and gasket from the U.S. what else will I need in terms of gaskets, seals and things to make the swap?
1.Tube of good quality instant gasket.
2. ATF.
3.I would replace the input shaft seals, and transfer case pinion seals. Just as a matter of precaution .
-Sump drain plug (x3 if you are getting a transfer box too)
-FIPG (instant gasket for the transmission oil pan, I use the Toyota Orange stuff)
-Transmission fluid (Dexron II or III, for a 3rd gen at least)
I would personally replace:
-Front/Rear driveshaft output seals
-Torque converter to oil pump seal
-output shaft to Transfer box seal
Stuff like that is probably going to be genuine Toyota, I got some engine seals and gaskets for my 3rd gen from Steven Eagle Toyota in Park street Hertfordshire they were very helpful. Cheap as well!
OK, the replacement transmission arrives soon and I've ordered a new filter and gasket from the U.S. what else will I need in terms of gaskets, seals and things to make the swap?
TIA
Might want to get yourself a spanner man to help as well Andy..you aint as younf as you used to be!!
Anyone? I can't relate the name of the part to a part number, so I can't order any of the seals I need, so can't get the truck back on the road, that has been sat outside the shed since early Jan, so any help translating parts to part numbers would be gratefully received
Comment