yobit eobot.com

Announcement

Collapse
No announcement yet.

Anti-roll bar bushes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Anti-roll bar bushes

    Just tried to get the rear drop linkage off the chassis mount to pack the bush with a washer as hinted at by the MOT tester and the bar snapped, now have to cut the nut off the ball joint cuz it is turning.

    Then I noticed the anti-roll bar bushes have about 2mm play (missed on the MOT).
    Does anyone know if the 2.4 bushes are the same size ( they are a bit cheaper) I measured the bar under the bushes and it reads 24.19mm, I guess a 24mm bar.


  • #2
    http://www.roughtrax4x4.com/?doc=16&cid=1005&vid=962

    same, if you have broken the top off you can grab it and pull it towards you and it should pop the ball joint piece apart, then you can get some mole grips on it and try undoing it that way.
    well, that was a bad idea!

    Comment


    • #3
      Originally posted by muddle View Post
      http://www.roughtrax4x4.com/?doc=16&cid=1005&vid=962

      same, if you have broken the top off you can grab it and pull it towards you and it should pop the ball joint piece apart, then you can get some mole grips on it and try undoing it that way.
      Thanks I shall go out into the rain and try that..

      Comment


      • #4
        3.0 roll bar bushes don't fit the 2.4 roll bar.

        That's why Roughtrax list 2 different part numbers.

        Comment


        • #5
          Originally posted by wishbone View Post
          3.0 roll bar bushes don't fit the 2.4 roll bar.

          That's why Roughtrax list 2 different part numbers.
          Cheers mate.

          Comment


          • #6
            Originally posted by muddle View Post
            http://www.roughtrax4x4.com/?doc=16&cid=1005&vid=962

            same, if you have broken the top off you can grab it and pull it towards you and it should pop the ball joint piece apart, then you can get some mole grips on it and try undoing it that way.
            That didn't work, just bent the bar.
            I have cut the nut off now.
            Thanks anyway...

            Comment


            • #7
              Stick an allen key in the end of stud.

              Nev

              Comment


              • #8
                Originally posted by wishbone View Post
                3.0 roll bar bushes don't fit the 2.4 roll bar.

                That's why Roughtrax list 2 different part numbers.
                2nd generation 2.4 and 3Ltr are the same.

                Nev

                Comment


                • #9
                  Originally posted by NiftyNev View Post
                  2nd generation 2.4 and 3Ltr are the same.

                  Nev
                  Yep - sorry about that Nev it's the front bars that differ. I replaced all 4 recently and thought I remembered the rears being the 'odd' ones.

                  Comment


                  • #10
                    3rd gens have two different diameter rear ARBs.

                    Comment


                    • #11
                      No hole

                      Originally posted by NiftyNev View Post
                      Stick an allen key in the end of stud.

                      Nev
                      No hole to stick it in.... Thanks anyway..

                      Comment

                      Working...
                      X