Powerflow Exhaust

[gary-r]

the 316L rods will be used to stop the joints corroding - the wee bit moly in the filler wire helps to stop the edge of the weld oxidising.

[Rustinho]

Quote for a full stainless steel system from the turbo back:

£529

Stainless system from Turbo : STD Bore 2.1/4 (57mm) £529.00 57mm is good for around 250BHP

For us to price 2.5" and 3" i would need to see the car first.


The above price is for a Longlife stainless steel exhaust system, fully fitted inclusive of VAT and comes with any tail pipe you choose from our standard range, some of the other tail pipes will incur an additional charge, please follow the link below to view our tail pipe selection;

http://www.topgearstockport.com/prod...rim-range.html

All our custom build performance Longlife exhausts are made from full 304 grade stainless steel and are covered by a lifetime guarantee from ourselves.

We are able to offer 6 months 0% finance or 6 months interest bearing finance to help you spread your payments. If you wish to apply for finance, please click on the following link
www.longlife.co.uk/finance and fill out the form. The amount you will need to apply for is the total of this quote.

Longlife Exhausts Stockport

To get the most from your new exhaust, we can also offer ECU Remapping on a wide range of vehicles, which means if your vehicle is registered after 2000 chances are we can reprogram the engines ECU for more power, better fuel economy, diesel particulate filter removals, top speed limiter removal. For more information and to see if your vehicle is listed, please follow the web link below;

http://www.topgearstockport.com/tgs-ecu-remapping.html

See the website for more details

If you are interested in having the above fitted to your vehicle or there is anything else you would like to know, please feel free to contact us by email, or you can call us direct on 0161 4948343.

Regards,

Craig Baxter

Longlife Exhausts,
Topgear Stockport,
Unit 4 Bredbury Court Ind Est
Ashton Road
Stockport
SK6 2QB
Tel : 01614948343
www.topgearstockport.com
www.longlifeexhausts.co.uk

For details on finding us please Click on the banner below.


Longlife Exhausts Stockport

£350 sounds a bit more appealing all of a sudden!

[galooph]

Quote for a full stainless steel system from the turbo back:

£529

£350 sounds a bit more appealing all of a sudden!

You're welcome to have a look at the one they did for me, if you want to check it out first.

[J i m s t e r]

Mine (a 3rd gen) just failed on exhaust centre box hole, was expected, to be fair, and a good enough excuse to get something better.

Have been quoted £360 for a full system from here (just down the road with a very good reputation)
http://www.jacexhausts.co.uk/

but then was alerted to this on t' bay:
http://www.ebay.co.uk/itm/Toyota-Hil...75123877434003

£360 will get me something new with a warranty, although it won't look as good as the twin pipes, but they are mottled already by the look of it...

Any input welcome...

[dieselboy]

Quote for a full stainless steel system from the turbo back:

£529



£350 sounds a bit more appealing all of a sudden!

Thats a decent price from the turbo itself! They would have to ensure the turbo bolts as well. For a jig fabricated off the shelve turbo pipe (in 3" mind) from an australian company the pipe alone is around £300. Plus they would need to clean your flange for a re-use.

Just be clear you are receiving what you are paying for. Different companies say cat back or downpipe back or flex back and depending on the vehicle on some this can mean the system starts from around the rear seat footwell area. In our instance it would usually be downpipe or flex pipe.

[Sancho]

plus they would need to clean your flange for a re-use.

[dieselboy]

[slobodan]

[Rustinho]

Thats a decent price from the turbo itself! They would have to ensure the turbo bolts as well. For a jig fabricated off the shelve turbo pipe (in 3" mind) from an australian company the pipe alone is around £300. Plus they would need to clean your flange for a re-use.

Just be clear you are receiving what you are paying for. Different companies say cat back or downpipe back or flex back and depending on the vehicle on some this can mean the system starts from around the rear seat footwell area. In our instance it would usually be downpipe or flex pipe.

The thing with mine is that the downpipe has split along some of it's length from the back end of the turbo. Smelly fumes are coming in through the blowers! Or maybe I do need to give my flange a good wipe & clean up...

[Rustinho]

You're welcome to have a look at the one they did for me, if you want to check it out first.

That'd be cracking, matey. When are free for me to have a quick look at it?

[galooph]

That'd be cracking, matey. When are free for me to have a quick look at it?

You have a PM

[Rustinho]

You have a PM

Cheers fella. I'll give you bell sometime to have a look at that 'zorst.