Its alive again!!!!!!!!!

[BigBobE]

but there aint no power getting to my glowplug busbar rail, i have +12v at the fuse, at the relay, but nothing at the rail....

so anyone got any idea of where the wiring goes from glowplug relay to busbar rail???

and where would one find this resistor????

[Albannach]

80 Amp fuse has blown.

[BigBobE]

that was my first thoughts andy, but 80amp fuse is fine, i have voltage at fuse, at relay, and leaving big chunky relay, after relay i cant seem to find where it goes before arriving at the busbar,

thanks to tonyn for pointing me in the right direction and getting truck running but i need to find this resistor he speaks of???

[BigBobE]

anyone got one of these yokies circled in green#????

[Webbo]

I had same symtoms,It was my 80amp fuse, very hard to see if its blown, minute gap. I did bridge mine with solder to get me by, until a very kind person on here sent me a spare.

[BigBobE]

I know my fuse is working. I have it narrowed down to resistor now. Just need to source one and get it mounted and I am back happy moorings again.....

[Webbo]

Have you tried Stormy or Bushy ? They may have one.

[TonyN]

Don't worry Bob, I found a couple yesterday after you rang, so if no one else has got in touch yet there is one here for you.