If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
thinking of fitting a dump valve to my truck,any one done this,does it sound any good on these and also does a stainless exhaust sound any good and make much difference performance wise.
The turbos in the Surfs are low pressure are they not?
if they are then a dump valve would not be great....the dump valave I had fitted to my saab turbo only came to life when I converted it from LPT to a FPT running 1.5bar of boost......before you could not even here it!
The exhaust is a good idea, got a powerflow system on my 3.0 G3 and it sounds fairly cool. Not too loud just makes a nice noise, problem is that since fitting a cone fliter and removing the airbox I can't hear anything other than filter suck.
THink the airbox will probably go back on next time I have a spare few hours.
I like the noise of a dump valve, it sounds cool BUT only when it is associated with a vehicle that is accelerating away from you at serious rate of knots.
You wouldn't want to be tarred with the same brush as them tw*ts who have them bolted to their Bora TDi's.
There's a punto bear me with a fully body kitted pinto...big Barry boy exhausts etc. Because this punto is only a 1.0 litre, it has some sort of sound effect/ electronic/ whack off in your sock dump valve noise. It makes me chuckle.
Comment