Help

[pops]

can anyone tell me is the chassis on a LN131 2.8 non turbo surf the same as the 1st gen surf please
i not convinced it is
looking to buy some roughtrax rock sliders to fit on my truck

[NiftyNev]

Frame is same as the LN130 acording to the EPC. The LN131 is as far as I know also second generation.

Nev

[pops]

Mr

thanks nev

Anita can i have some rock sliders for my truck please

[Vagrant No2]

can anyone tell me is the chassis on a LN131 2.8 non turbo surf the same as the 1st gen surf please
i not convinced it is
looking to buy some roughtrax rock sliders to fit on my truck

Dont compare your 2nd Gen to a superior 1st Gen !!

[pops]

Mr

Dont compare your 2nd Gen to a superior 1st Gen !!

I was not comparing you donut
just tryin to establish if the rock sliders put on a 1st gen would fit my 2.8 OK

[Koi]

and as for your title HELP


















Your beyond it

[TonyN]

Frame is same as the LN130 acording to the EPC. The LN131 is as far as I know also second generation.

Nev

thanks nev

Anita can i have some rock sliders for my truck please

All Nev said is your trucks frame is the same as a 2.4 2nd gen, I'm not sure they are the same, I think 1st Gen has a shorter wheel base then a 2nd Gen.

[pops]

Mr

All Nev said is your trucks frame is the same as a 2.4 2nd gen, I'm not sure they are the same, I think 1st Gen has a shorter wheel base then a 2nd Gen.

sumo fitted mk3 pickup rock sliders from roughtrax to his 1st gen
and the overall length of the sliders will put them the same as sumo's truck.
just wanted to be sure the chassis are the same before i BUY thats all as they on offer at the moment and we all love a bargain dont we???

[surfenstein]

the wheelbase is shorter on a first gen by about 2",if i remember correctly,when i fabbed up my rocksliders from a drawing on here,i remember them being to long for the 1st gen so had to cut and shut them.

[sumo]

sumo fitted mk3 pickup rock sliders from roughtrax to his 1st gen
and the overall length of the sliders will put them the same as sumo's truck.
just wanted to be sure the chassis are the same before i BUY thats all as they on offer at the moment and we all love a bargain dont we???

The mk 3 sliders fit straight onto the chaissis rail and are easy to fit. However the drivers side rear has an extended plate which should bolt onto the rail up between the rail and the fuel tank. the bolt holes were there on my truck but full of MUD so a mod was required, (out came the grinder, I trimmed the plate so it fitted the rail lower down and with the offcut made a back plate, drilled a couple of holes and aquired a pair of U bolts from my local motor factors trailer accesories shelf job done.)
you may find that if the new spooky mobile has a longer chassis the the mod will fit on the straight part of the rail, mine fit just above the bend.

[pops]

Mr

The mk 3 sliders fit straight onto the chaissis rail and are easy to fit. However the drivers side rear has an extended plate which should bolt onto the rail up between the rail and the fuel tank. the bolt holes were there on my truck but full of MUD so a mod was required, (out came the grinder, I trimmed the plate so it fitted the rail lower down and with the offcut made a back plate, drilled a couple of holes and aquired a pair of U bolts from my local motor factors trailer accesories shelf job done.)
you may find that if the new spooky mobile has a longer chassis the the mod will fit on the straight part of the rail, mine fit just above the bend.

thankyou Mr sumo anita can i order the sliders now??

[Vagrant No2]

Martin , do you want me to look at both my 1st and 2nd gen chassis to compare mount points for you before you order sliders as the mounts may be different ?

[BioHazard]

Right the rock slider plans here ...... http://daemon4x4.org/portal/downloads.php?dcid=13 are for a first gen to fit a 2nd gen they need to be 4 inches shorter in length as the distance between the arches are different, the mounting points are the same

[pops]

Mr

Martin , do you want me to look at both my 1st and 2nd gen chassis to compare mount points for you before you order sliders as the mounts may be different ?

yes please rick be most helpful thankyou

[pops]

Mr

Right the rock slider plans here ...... http://daemon4x4.org/portal/downloads.php?dcid=13 are for a first gen to fit a 2nd gen they need to be 4 inches shorter in length as the distance between the arches are different, the mounting points are the same

nothing there to see