Ordered White Guages from U.S.

[Morr]

Hi Trev

I've finally dug out my scans of the 3rd Gen dials, took me long enough i know, sorry.
Anyway, they're somewhat on the large size, I'm attaching some jpg versions, they're fairly compressed but should look OK.
If you need higher resolution pics, I have the original scans, but each main dial is nearly 80 megs in its raw state, most of the jpg versions i used run around 700k (the ones i'm posting here are smaller). Drop me a PM with your address and I'll burn the lot onto disc and post them to you if required.

Note also, these pics have been retouched, slightly, colours have been removed, warning symbols which would normally be invisable are shown in white. Speedo is redrawn version with both Mph & Kph as my original was Kph only.

[da SLUG man]

Speedo is redrawn version with both Mph & Kph as my original was Kph only.

this is different to the re chipped speedo as mine goes up to 180 MPH
and doesn't have KPH on it.... how would we get around that?

[andy]

this is different to the re chipped speedo as mine goes up to 180 MPH
and doesn't have KPH on it.... how would we get around that?

I think you would have to remove the chip, then the new face would work.

[da SLUG man]

I think you would have to remove the chip, then the new face would work.

and where do they keep them??...

[chiz]

stick me down for a 3rd gen set

i like
very much



anyone no where i can get a set of nudge bars from oooo and a rear spoiler

[That Ruddy Squirrel]

Hi Chiz,


Consider yourself number 5 of the first 10 3rd Gen - the latest counts as follows :-

At present the count are :-

#1 - Udtrev
#2 - Mick B
#3 - B3AVW
#4 - AndyL
#5 - Koi (4runner)
#6 - Firefly
#7 - Mithujee
#8 - Ohsupremebeing
#9 - Nexus

and for the 3rd Gen :-

#1 - Slydog
#2 - Robd
#3 - Ace Piker
#4 - Cockney Surfer
#5 - Chiz

Trev

[ozzy]

do you want me to be number 10? i am a newbie, i have a think 2nd gen surf,
ln 130/2.4 ssrx turbo diesel 92 model. if they fit i will be number ten then.
whats the full cost, who were how when do you ? needs to be paid .
when can we expect delivery, etc.
cheers ozzy.

[That Ruddy Squirrel]

Thanks Ozzy,


Will put you down as #10 and get in touch with the company.

Will post more tonight.


Trev

[That Ruddy Squirrel]

Hi there,


We have an update, and we can now begin to get the wheels in motion for the 2nd Gen gauges - the latest counts as follows :-

At present the count are :-

#1 - Udtrev
#2 - Mick B
#3 - B3AVW
#4 - AndyL
#5 - Koi (4runner)
#6 - Firefly
#7 - Mithujee
#8 - Ohsupremebeing
#9 - Nexus
#10 - Ozzy

and for the 3rd Gen :-

#1 - Slydog
#2 - Robd
#3 - Ace Piker
#4 - Cockney Surfer
#5 - Chiz

I would suspect that we all need to place separate orders with Street Racer Parts, but I am awaiting confirmation on that, and I am also awaiting confirmation on being able to send them the pattern bits

As soon as I know more I will let you know, but i am planning on the bits going Stateside soon.


Trev

[AndyLala]

Thanks UDtrev for sticking with this.

Much appreciated. Obviously we will need lead times, order process, etc... I presume that we place an order against a production run number... and we should all get Civic EG6 White gauges in the fullness of time...

I presume that PM is the best way to let everyone know that its possible?

A quick show of hands might also be good for those that still want them... (can afford them)...?

**********
Still want my set
**********

andyL

[That Ruddy Squirrel]

Thanks UDtrev for sticking with this.

Much appreciated. Obviously we will need lead times, order process, etc... I presume that we place an order against a production run number... and we should all get Civic EG6 White gauges in the fullness of time...

I presume that PM is the best way to let everyone know that its possible?

A quick show of hands might also be good for those that still want them... (can afford them)...?

andyL

Obviously waiting to hear back from them at the moment, and I will naturally come back to you all when I hear, but, in the meantime here is my grubby paw raised high - hows that for a show of mitts ?

Still waiting on confirmation for the patterns too


Trev

[nexus]

HI TREV
MY HANDS ARE STILL RAISED HIGH AND IM JUST WAITING ON INSTRUCTION ON HOW TO PAY ETC.

ALAN

[firefly]

Me Too Trev

[TOYMOTA]

Yeh i'm still up for them man!!!!!!!!!!!

[ohsupremebeing]

i am still up for them too