Went and got my tirfor today

[BioHazard]

What a piece of kit , It moves tractors with ease......... the only down side is i need to get a proper handle and some shear pins

[biosurf]

Yep get a few shear pins if you can. Lots of people just stick a bolt in and essentially lose the safety factor of a load tested pin.
Sure a handle can be fashioned easy enough though

Glad you've got it and its all OK

[LURCH]

Whats one of them then, and picture required too.........

[fatfires]

Whats one of them then, and picture required too.........

tried Google?

[LURCH]

Why google when there is such a helpful non whingeing and whining group of people on here.........

[BioHazard]

Why google when there is such a helpful non whingeing and whining group of people on here.........

http://www.honeybros.com/index.php?a...rodsort=NAMEUP



Lazy goodfornothing chav

[LURCH]

http://www.honeybros.com/index.php?a...rodsort=NAMEUP



Lazy goodfornothing chav

Oh that rusty bit of junk you bought, goes with your truck.........

[fatfires]

Why google when there is such a helpful non whingeing and whining group of people on here.........

Sorry couldnt find a cynical smily....just look at the insults allready (idle bug ger)

[That Ruddy Squirrel]

just look at the insults allready (idle bug ger)

Don't worry, Lurch is a shuffling (how can you call that gait walking ?) insult

[fatfires]

Yep get a few shear pins if you can. Lots of people just stick a bolt in and essentially lose the safety factor of a load tested pin.
Sure a handle can be fashioned easy enough though

Glad you've got it and its all OK

Make sure the shear pins are for your model....they are variously rated according to type and loading

[gwh200]

Good evening tony,
better still use lurch's little finger

[BioHazard]

Make sure the shear pins are for your model....they are variously rated according to type and loading

Its a t3c so a older one (T 3 5)3 tonne lift and 5 tonne pull , need to find a manual online and a supplier for the pins

[That Ruddy Squirrel]

Its a t3c so a older one (T 3 5)3 tonne lift and 5 tonne pull , need to find a manual online and a supplier for the pins

Any use ? http://www.stantonhope.co.uk/26_Equi...el_Winches.asp


Trev

[BioHazard]

thats why i need a manual as cannot find the shear pin

[That Ruddy Squirrel]

And these ?

http://cgi.ebay.co.uk/NEW-Shear-pins...item3a543dd740